Corona
Part Number | X857330 and X859085 |
---|---|
Introduced | Mid 2011 |
Type | Motherboard |
Used In | Xbox 360 S |
CGPU Type | Valhalla |
CGPU Process | 45nm |
eDRAM Process | 65nm |
Nand Size | 16MB or 4GB |
Video Outputs | A/V Multi and HDMI |
Wattage | 120W |
12V Amperage | 9.6A |
Predecessor | Trinity |
Successor | Corona Waitsburg |
The Corona is the successor to the Trinity and is used in the Xbox 360 S. Corona is similar to Trinity but simplifies the system significantly.
Commonly referred to by the community (but not by Microsoft) as the "Corona V1" (16MB) and "Corona V2" (4GB).
Notable Differences
- The PSB has been replaced with the KSB
- The HANA and Ethernet PHY are removed, their functionality has been integrated into the KSB
- Elpida U1032AABG-14-F RAM is no longer used
- Hynix & Phison MMC solution has been added on 4GB SKUs
- The Memory Unit daughterboard and connector were removed
- The standby voltage regulation has been redesigned
- The V_1P8STBY power rail has been replaced with V_1P2STBY
- The board layout has been simplified and cleaned up
- Clock generation now uses a 25MHz crystal and all single-ended clocks are internal to the KSB
Specifications
- 45nm IBM/ATi Valhalla CGPU with integrated 65nm NEC eDRAM
- 512MB GDDR3 RAM
- 4x128MB Hynix H5RS1H23MFR
- 4x128MB Samsung K4J10324KE-HC14
- KSB Southbridge
- Nand
- 16MB Hynix HY27US08281A
- 16MB ST NAND128W3A2BN6
- 4GB Hynix H27UBG8T2BTA with Phison PS7000 MMC controller
- Short Slug Heatsink
Waitsburg
Part Number | X862605 |
---|---|
Introduced | Early 2012 |
Type | Motherboard |
Used In | Xbox 360 S |
CGPU Type | Valhalla |
CGPU Process | 45nm |
eDRAM Process | 65nm |
Nand Size | 16MB or 4GB |
Video Outputs | A/V Multi and HDMI |
Wattage | 120W |
12V Amperage | 9.6A |
Predecessor | Corona |
Successor | Corona Stingray |
The Corona Waitsburg is the successor to the Corona and is the final motherboard used in the Xbox 360 S. It is extremely similar to Corona, with a few minor differences.
Commonly referred to by the community (but not by Microsoft) as the "Corona V3" (16MB) and "Corona V4" (4GB).
Notable Differences
- Samsung K4J10324KG-HC14 and Winbond W641GG2JB-14 RAM have been added as options
- Hynix H5RS1H23MFR RAM is no longer used
- The Hynix & Phison MMC solution on 4GB SKUs has been replaced with the Hynix H26M31001FPR eMMC
- The POST_OUT traces from the CGPU have been removed
- Minor board layout changes
Specifications
- 45nm IBM/ATi Valhalla CGPU with integrated 65nm NEC eDRAM
- 512MB GDDR3 RAM
- 4x128MB Samsung K4J10324KE-HC14
- 4x128MB Samsung K4J10324KG-HC14
- 4x128MB Winbond W641GG2JB-14
- KSB Southbridge
- Nand
- 16MB Hynix HY27US08281A
- 16MB ST NAND128W3A2BN6
- 4GB Hynix H26M31001FPR eMMC
- Short Slug Heatsink
Stingray
Part Number | X854326 |
---|---|
Introduced | Mid 2013 |
Type | Motherboard |
Used In | Xbox 360 E |
CGPU Type | Valhalla |
CGPU Process | 45nm |
eDRAM Process | 65nm |
Nand Size | 16MB or 4GB |
Video Outputs | Composite and HDMI |
Wattage | 120W |
12V Amperage | 9.6A |
Predecessor | Corona Waitsburg |
Successor | Winchester |
The Corona Stingray is the successor to the Corona Waitsburg and is the first motherboard used in the Xbox 360 E. It is extremely similar to Waitsburg, with a few differences.
Commonly referred to by the community (but not by Microsoft) as the "Corona V5" (16MB) and "Corona V6" (4GB).
Notable Differences
- Winbond W641GG2JB-14 RAM has been replaced with Winbond W641GG2KB-14 (Rreferred to by the community as WB2K)
- Samsung K4J10324KE-HC14 RAM has been replaced with Samsung K4J10324KG-HC14
- Hynix H26M31001FPR eMMC on 4GB SKUs has been replaced with the SK Hynix H26M31002GPR
- Toshiba THGBM5G5A1JBAIR eMMC was added as an option on 4GB SKUs
- The A/V Multi port and most of its circuitry have been removed and replaced by composite video out
- The DC jack has been revised to a single barrel
- The rear triple USB port has been reduced to a dual USB port
- SPDIF has been removed from the rear I/O
- The rotation sensor has been removed, but the traces and pads are still present
- Audible Feedback has been removed, but the traces and pads are still present
- The 1575 RF board is now used
- Minor board layout changes
Specifications
- 45nm IBM/ATi Valhalla CGPU with integrated 65nm NEC eDRAM
- 512MB GDDR3 RAM
- 4x128MB Samsung K4J10324KG-HC14
- 4x128MB Winbond W641GG2KB-14
- KSB Southbridge
- Nand
- 16MB SK Hynix HY27US08281A
- 16MB ST NAND128W3A2BN6
- 4GB SK Hynix H26M31002GPR eMMC
- 4GB Toshiba THGBM5G5A1JBAIR eMMC
- Short Slug Heatsink