Tonasket: Difference between revisions
Jump to navigation
Jump to search
(Redirected page to Jasper#Tonasket) Tag: New redirect |
(Removed redirect to Jasper#Tonasket) Tag: Removed redirect |
||
| Line 1: | Line 1: | ||
# | == Tonasket == | ||
{{Infobox Motherboard | |||
| name = Tonasket | |||
| image = X820379-001.jpg | |||
| introduced = Late 2009 | |||
| partnumber = X820379 | |||
| type = Motherboard | |||
| usedin = [[Xbox 360 (Original)]] | |||
| cputype = [[Loki (CPU)|Loki]] | |||
| gputype = [[Kronos (GPU)|Kronos]] | |||
| cpuprocess = 65nm | |||
| gpuprocess = 65nm | |||
| edramprocess = 65nm | |||
| nandsize = 16MB, 512MB | |||
| video = [[A/V]] and HDMI | |||
| wattage = 150W | |||
| 12vamps = 12.1A | |||
| predecessor = [[Jasper]] | |||
| successor = [[Trinity]] | |||
}} | |||
'''Tonasket''' (known by the community as '''Kronos''') is the successor to the [[#top|Jasper]], and is the final motherboard used in the [[Original Xbox 360]] series. It is considered a variation of [[Jasper]]. | |||
=== Notable Differences === | |||
* The 65nm [[Zeus (GPU)|Zeus]] GPU has been replaced with the 65nm [[Kronos (GPU)|Kronos]] GPU, which shrinks the [[eDRAM]] to 65nm | |||
* [[Samsung RAM#K4J10324QD-HC14|Samsung K4J10324QD-HC14]] RAM was added as an option | |||
* [[Hynix RAM#H5RS5223CFR-14C|Hynix H5RS5223CFR-14C]] RAM is no longer used | |||
* 8x64MB RAM configurations are no longer used, but still supported by the motherboard | |||
* The 256MB nand chip was no longer used, only 512MB configurations were used in the [[Arcade]] SKU | |||
* The additional traces and pads for DUMBO/PANDA flash controller were removed | |||
* An alternate simplified standby circuit for [[Power Rails#V_3P3STBY|V_3P3STBY]] and [[Power Rails#V_1P8STBY|V_1P8STBY]] was added, but only some manufacturers used it | |||
* The board layout was cleaned up | |||
* All motherboards use an updated [[RF Board#RF02|RF02]] board | |||
* The [[Heatsinks#Extended GPU| extended]] GPU heatsink was reverted back to the [[Heatsinks#Low Profile GPU|low profile]] GPU heatsink | |||
* All boards now use solid state capacitors for the CPU and GPU output filters | |||
* There is no longer glue applied around the CPU and GPU | |||
=== Specifications === | |||
* 65nm IBM [[Loki (CPU)|Loki]] CPU | |||
* 65nm ATi [[Kronos (GPU)|Kronos]] GPU with integrated 65nm NEC [[eDRAM]] | |||
* 512MB GDDR3 RAM | |||
** 4x128MB [[Hynix RAM#H5RS1H23MFR-14C|Hynix H5RS1H23MFR-14C]] | |||
** 4x128MB [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] | |||
** 4x128MB [[Samsung RAM#K4J10324QD-HC14|Samsung K4J10324QD-HC14]] | |||
* [[PSB]] Southbridge | |||
* [[HANA]] | |||
* Nand | |||
** 16MB [[Nand#Hynix HY27US08281A|Hynix HY27US08281A]] | |||
** 512MB [[Nand#Hynix HY27UF084G2B|Hynix HY27UF084G2B]] | |||
** 512MB [[Nand#Samsung K9F4G08U0B|Samsung K9F4G08U0B]] | |||
* Boardcom or ICS Ethernet PHY | |||
* [[Heatsinks#Aluminum CPU|Aluminum]] CPU Heatsink | |||
* [[Heatsinks#Low Profile GPU|Low Profile]] GPU Heatsink | |||
{{Console Components}} | |||
[[Category:Motherboards]] | |||
Revision as of 12:24, 18 January 2023
Tonasket
 | |
| Part Number | X820379 |
|---|---|
| Introduced | Late 2009 |
| Type | Motherboard |
| Used In | Xbox 360 (Original) |
| CPU Type | Loki |
| GPU Type | Kronos |
| CPU Process | 65nm |
| GPU Process | 65nm |
| eDRAM Process | 65nm |
| Nand Size | 16MB, 512MB |
| Video Outputs | A/V and HDMI |
| Wattage | 150W |
| 12V Amperage | 12.1A |
| Predecessor | Jasper |
| Successor | Trinity |
Tonasket (known by the community as Kronos) is the successor to the Jasper, and is the final motherboard used in the Original Xbox 360 series. It is considered a variation of Jasper.
Notable Differences
- The 65nm Zeus GPU has been replaced with the 65nm Kronos GPU, which shrinks the eDRAM to 65nm
- Samsung K4J10324QD-HC14 RAM was added as an option
- Hynix H5RS5223CFR-14C RAM is no longer used
- 8x64MB RAM configurations are no longer used, but still supported by the motherboard
- The 256MB nand chip was no longer used, only 512MB configurations were used in the Arcade SKU
- The additional traces and pads for DUMBO/PANDA flash controller were removed
- An alternate simplified standby circuit for V_3P3STBY and V_1P8STBY was added, but only some manufacturers used it
- The board layout was cleaned up
- All motherboards use an updated RF02 board
- The extended GPU heatsink was reverted back to the low profile GPU heatsink
- All boards now use solid state capacitors for the CPU and GPU output filters
- There is no longer glue applied around the CPU and GPU
Specifications
- 65nm IBM Loki CPU
- 65nm ATi Kronos GPU with integrated 65nm NEC eDRAM
- 512MB GDDR3 RAM
- 4x128MB Hynix H5RS1H23MFR-14C
- 4x128MB Qimonda HYB18H1G321AF-14
- 4x128MB Samsung K4J10324QD-HC14
- PSB Southbridge
- HANA
- Nand
- 16MB Hynix HY27US08281A
- 512MB Hynix HY27UF084G2B
- 512MB Samsung K9F4G08U0B
- Boardcom or ICS Ethernet PHY
- Aluminum CPU Heatsink
- Low Profile GPU Heatsink