Falcon: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
| edramprocess = 80nm | | edramprocess = 80nm | ||
| nandsize = 16MB (Retail)<br>64MB (Dev) | | nandsize = 16MB (Retail)<br>64MB (Dev) | ||
| video = [[A/V | | video = [[A/V]] and HDMI | ||
| wattage = 175W | | wattage = 175W | ||
| 12vamps = 14.2A | | 12vamps = 14.2A | ||
Revision as of 15:28, 2 January 2023
| Part Number | X812320 |
|---|---|
| Introduced | Late 2007 |
| Type | Motherboard |
| Used In | Xbox 360 (Original) |
| CPU Type | Loki |
| GPU Type | Rhea |
| CPU Process | 65nm |
| GPU Process | 80nm |
| eDRAM Process | 80nm |
| Nand Size | 16MB (Retail) 64MB (Dev) |
| Video Outputs | A/V and HDMI |
| Wattage | 175W |
| 12V Amperage | 14.2A |
| Predecessor | Zephyr_C |
| Successor | Jasper |
The Falcon is the successor to the Zephyr_C and is used in the Original Xbox 360 series.
Notable Differences
- The 90nm Waternoose CPU has been replaced with the 65nm Loki CPU
- When the revised GPUs rolled out, around March 2008, all board started using Qimonda HYB18H1G321AF-14 RAM in a 4x128MB config
- Around March 2008, fixed GPUs started being used
- The CPU voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
- The board layout has been modified to support the 65nm CPU
- Other small changes were made to the board layout
- The J7G3 Titan connector on the front of the motherboard was left on the final motherboard
- Some later boards used solid state capacitors for the CPU and GPU output filters
- The heatpipe CPU heatsink was replaced with the aluminum CPU heatsink
Specifications
- 65nm IBM Loki CPU
- 80nm ATi Rhea GPU with integrated 80nm NEC eDRAM
- 512MB GDDR3 RAM
- 8x64MB Hynix HY5RS123235B (Early Boards)
- 8x64MB Qimonda HYB18H512322AF-13 (Early Boards)
- 4x128MB Qimonda HYB18H1G321AF-14 (Mid/Late Boards)
- XSB R0 Southbridge
- HANA
- Nand
- 16MB Hynix HY27US08281A (Retail)
- 64MB Samsung K9F1208U0B (Dev)
- Boardcom or ICS Ethernet PHY
- Aluminum CPU Heatsink
- Extended GPU Heatsink
Opus
The Opus motherboard is exactly the same as the Falcon, with exception to a custom A/V port that is installed, and the removal of the HDMI port. These modifications allow the Opus to fit into the casings for a Xenon. This was used for refurbishing defective consoles until the Elpis boards started being produced. The part number is also the same as Falcon.
Notable Differences
- Removal of the HDMI port
- Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing
- All Opus boards use 4x128MB Qimonda HYB18H1G321AF-14 RAM