Xenon (Motherboard): Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
| type = Motherboard | | type = Motherboard | ||
| usedin = [[Xbox 360 (Original)]] | | usedin = [[Xbox 360 (Original)]] | ||
| cputype = [[ | | cputype = [[Waternoose]] | ||
| gputype = [[Y1 (GPU)|Y1]] | | gputype = [[Y1 (GPU)|Y1]] | ||
| cpuprocess = 90nm | | cpuprocess = 90nm | ||
| Line 29: | Line 29: | ||
=== Specifications === | === Specifications === | ||
* 90nm IBM [[Waternoose | * 90nm IBM [[Waternoose#DD2.0|Waternoose DD2.x or DD3.0]] CPU | ||
* 90nm ATi [[Y1 (GPU)|Y1]] GPU with integrated 90nm NEC [[eDRAM]] | * 90nm ATi [[Y1 (GPU)|Y1]] GPU with integrated 90nm NEC [[eDRAM]] | ||
* 512MB GDDR3 RAM | * 512MB GDDR3 RAM | ||
Revision as of 11:18, 19 January 2023
 | |
| Part Number | X803600 |
|---|---|
| Introduced | Late 2005 |
| Type | Motherboard |
| Used In | Xbox 360 (Original) |
| CPU Type | Waternoose |
| GPU Type | Y1 |
| CPU Process | 90nm |
| GPU Process | 90nm |
| eDRAM Process | 90nm |
| Nand Size | 16MB (Retail) 64MB (Dev) |
| Video Outputs | A/V |
| Wattage | 203W |
| 12V Amperage | 16.5A |
| Successor | Zephyr_A |
The Xenon motherboard is the first motherboard and is used in the Original Xbox 360 series. The motherboard has a unique board layout compared to the later boards, especially noticeable with the capacitors around the CPU heatsink, and use of the ANA chip.
Notes
- At some point in 2006, at least one of the manufacturers of the Xenon started applying glue around the CPU and GPU, likely as an attempt to reduce the failure rate
- Some consoles use small yellow 820uF capacitors, while other consoles use silver 820uF solid capacitors
- Some capacitors used for voltage regulation positioned around the CPU heatsink are defective and prone to failure (see Capacitor Plague for details)
- There are two different versions of the XSB southbridge used, initially G0, and later switching to R0
- At some point in 2006, the extended GPU heatsink started being used instead of the low profile GPU heatsink
Specifications
- 90nm IBM Waternoose DD2.x or DD3.0 CPU
- 90nm ATi Y1 GPU with integrated 90nm NEC eDRAM
- 512MB GDDR3 RAM
- 8x64MB Infineon HYB18H512321AF-13
- 8x64MB Samsung K4J52324QC-BC14
- XSB Southbridge
- ANA
- Nand
- 16MB Hynix HY27US08281A (Retail)
- 64MB Samsung K9F1208U0B (Dev)
- Boardcom or ICS Ethernet PHY
- Cypress Clock Generator
- Heatpipe CPU Heatsink
- GPU Heatsink
- Low Profile (Early/Mid Boards)
- Extended (Late Boards)