Falcon: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 35: | Line 35: | ||
* 80nm ATi [[Rhea (GPU)|Rhea]] GPU with integrated 80nm NEC [[eDRAM]] | * 80nm ATi [[Rhea (GPU)|Rhea]] GPU with integrated 80nm NEC [[eDRAM]] | ||
* 512MB DDR3 RAM | * 512MB DDR3 RAM | ||
** 8x64MB [[Hynix RAM#HY5RS123235B|Hynix HY5RS123235B]] (Early | ** 8x64MB [[Hynix RAM#HY5RS123235B|Hynix HY5RS123235B]] (Early Boards) | ||
** 8x64MB [[Qimonda RAM#HYB18H512322AF-13|Qimonda HYB18H512322AF-13]] (Early Boards) | ** 8x64MB [[Qimonda RAM#HYB18H512322AF-13|Qimonda HYB18H512322AF-13]] (Early Boards) | ||
** 4x128MB [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] (Mid/Late Boards) | ** 4x128MB [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] (Mid/Late Boards) | ||
Revision as of 23:56, 22 December 2022
| Part Number | X812320 |
|---|---|
| Introduced | Late 2007 |
| Type | Motherboard |
| Used In | Xbox 360 (Original) |
| CPU Type | Loki |
| GPU Type | Rhea |
| CPU Process | 65nm |
| GPU Process | 80nm |
| eDRAM Process | 80nm |
| Nand Size | 16MB |
| Video Outputs | A/V Multi and HDMI |
| Wattage | 175W |
| 12V Amperage | 14.2A |
| Predecessor | Zephyr_C |
| Successor | Jasper |
The Falcon is the successor to the Zephyr_C and is used in the Original Xbox 360 series.
Notable Differences
- The 90nm Waternoose2 CPU has been replaced with the 65nm Loki CPU
- When the revised GPUs rolled out, around March 2008, all board started using Qimonda HYB18H1G321AF-14 RAM in a 4x128MB config
- Around March 2008, fixed GPUs started being used
- The CPU voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
- The board layout has been modified to support the 65nm CPU
- Other small changes were made to the board layout
- The J7G3 Titan connector on the front of the motherboard was left on the final motherboard
- Some later boards used solid state capacitors for the CPU and GPU output filters
- The heatpipe CPU heatsink was replaced with the aluminum CPU heatsink
Specifications
- 65nm IBM Loki CPU
- 80nm ATi Rhea GPU with integrated 80nm NEC eDRAM
- 512MB DDR3 RAM
- 8x64MB Hynix HY5RS123235B (Early Boards)
- 8x64MB Qimonda HYB18H512322AF-13 (Early Boards)
- 4x128MB Qimonda HYB18H1G321AF-14 (Mid/Late Boards)
- XSB Southbridge
- HANA
- 16MB Hynix HY27US08281A Nand
- Boardcom or ICS Ethernet PHY
Opus
The Opus motherboard is exactly the same as the Falcon, with exception to a custom A/V port that is installed, and the removal of the HDMI port. These modifications allow the Opus to fit into the casings for a Xenon. This was used for refurbishing defective consoles until the Elpis boards started being produced. The part number is also the same as Falcon.
Notable Differences
- Removal of the HDMI port
- Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing
- All Opus' use 4x128MB Qimonda HYB18H1G321AF-14 RAM