Heatsink: Difference between revisions
(Proto Heatsinks and information on final heatsink for Xenons) |
|||
| Line 6: | Line 6: | ||
=== Heatpipe CPU === | === Heatpipe CPU === | ||
Used on the [[Xenon (Motherboard)|Xenon]], [[Zephyr]], and [[Elpis (Motherboard)|Elpis]] motherboards. It was also used on very early versions of the [[Falcon]] motherboard. | Used on the [[Xenon (Motherboard)|Xenon]], [[Zephyr]], and [[Elpis (Motherboard)|Elpis]] motherboards. It was also used on very early versions of the [[Falcon]] motherboard. Later revisions found on late 2006 and newer boards had less of a cutout near the rounded heat pipe on the side. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Heatpipe-CPU.jpg | File:Heatpipe-CPU.jpg | ||
File:Heatpipe-CPU-Bottom.jpg | File:Heatpipe-CPU-Bottom.jpg | ||
| Line 16: | Line 16: | ||
Used on the [[Falcon]], [[Jasper]], and [[Tonasket]] motherboards. | Used on the [[Falcon]], [[Jasper]], and [[Tonasket]] motherboards. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Aluminum-CPU.jpg | File:Aluminum-CPU.jpg | ||
File:Aluminum-CPU-Bottom.jpg | File:Aluminum-CPU-Bottom.jpg | ||
| Line 24: | Line 24: | ||
Used on early/mid [[Xenon (Motherboard)|Xenon]] motherboards, [[Zephyr#Zephyr_A|Zephyr_A]] motherboards, and returned on the [[Tonasket]] motherboard. | Used on early/mid [[Xenon (Motherboard)|Xenon]] motherboards, [[Zephyr#Zephyr_A|Zephyr_A]] motherboards, and returned on the [[Tonasket]] motherboard. | ||
<gallery widths=300px heights=200px> | <gallery widths="300px" heights="200px"> | ||
File:Low-Profile-GPU.jpg | File:Low-Profile-GPU.jpg | ||
File:Low-Profile-GPU-Bottom.jpg | File:Low-Profile-GPU-Bottom.jpg | ||
| Line 32: | Line 32: | ||
Used on late [[Xenon (Motherboard)|Xenon]], [[Zephyr#Zephyr_B|Zephyr_B/C]], [[Elpis (Motherboard)|Elpis]], [[Falcon]], and [[Jasper]] motherboards. | Used on late [[Xenon (Motherboard)|Xenon]], [[Zephyr#Zephyr_B|Zephyr_B/C]], [[Elpis (Motherboard)|Elpis]], [[Falcon]], and [[Jasper]] motherboards. | ||
<gallery widths=350px heights=200px> | <gallery widths="350px" heights="200px"> | ||
File:Extended-GPU.jpg | File:Extended-GPU.jpg | ||
File:Extended-GPU-Bottom.jpg | File:Extended-GPU-Bottom.jpg | ||
| Line 40: | Line 40: | ||
The [[Xbox 360 S]] and [[Xbox 360 E]] use a single heatsink for the [[CGPU]]. There were 2 versions of the heatsink. Both versions have a [[fan]] mounted on them. | The [[Xbox 360 S]] and [[Xbox 360 E]] use a single heatsink for the [[CGPU]]. There were 2 versions of the heatsink. Both versions have a [[fan]] mounted on them. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Xbox-360-S-Cooler.jpg|Heatsink with a [[Fans|fan]] mounted on top | File:Xbox-360-S-Cooler.jpg|Heatsink with a [[Fans|fan]] mounted on top | ||
File:Xbox-360-S-Heatsink-Bottom.jpg|Bottom of the heatsink | File:Xbox-360-S-Heatsink-Bottom.jpg|Bottom of the heatsink | ||
| Line 48: | Line 48: | ||
Used on the [[Trinity]] motherboard. This heatsink was only used for a brief time. | Used on the [[Trinity]] motherboard. This heatsink was only used for a brief time. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Xbox-360-S-Tall-Slug.jpg | File:Xbox-360-S-Tall-Slug.jpg | ||
</gallery> | </gallery> | ||
| Line 55: | Line 55: | ||
Used on the [[Trinity]], [[Corona]], [[Waitsburg]], and [[Stingray]] motherboards. It was also used on [[Winchester]] with slightly shortened pegs on the bottom, as Winchester removed the [[IHS|integrated heat spreader]]. | Used on the [[Trinity]], [[Corona]], [[Waitsburg]], and [[Stingray]] motherboards. It was also used on [[Winchester]] with slightly shortened pegs on the bottom, as Winchester removed the [[IHS|integrated heat spreader]]. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Xbox-360-S-Short-Slug.jpg | File:Xbox-360-S-Short-Slug.jpg | ||
</gallery> | </gallery> | ||
== Prototypes == | |||
The following heatsinks were used on different Xbox 360 console variations. | |||
=== Xbox 360 S Cooler Master Fan & Heatsink === | |||
Used on early Trinity prototypes, this heatsink is thicker than the final heatsink and does not feature a copper slug. This was used in correlation with a different fan shroud as well with F92 markings. | |||
{{Console Components}} | {{Console Components}} | ||
[[Category:Console Components]] | [[Category:Console Components]] | ||
Revision as of 18:41, 9 April 2024
The Xbox 360 has used multiple different type of heatsinks for cooling the processors.
Xbox 360 (Original)
The Original Xbox 360 used 2 heatsinks: one for the CPU, and one for the GPU. There were also 2 different versions of each heatsink.
Heatpipe CPU
Used on the Xenon, Zephyr, and Elpis motherboards. It was also used on very early versions of the Falcon motherboard. Later revisions found on late 2006 and newer boards had less of a cutout near the rounded heat pipe on the side.
Aluminum CPU
Used on the Falcon, Jasper, and Tonasket motherboards.
Low Profile GPU
Used on early/mid Xenon motherboards, Zephyr_A motherboards, and returned on the Tonasket motherboard.
Extended GPU
Used on late Xenon, Zephyr_B/C, Elpis, Falcon, and Jasper motherboards.
Xbox 360 S and Xbox 360 E
The Xbox 360 S and Xbox 360 E use a single heatsink for the CGPU. There were 2 versions of the heatsink. Both versions have a fan mounted on them.
Heatsink with a fan mounted on top
Bottom of the heatsink
Tall Slug
Used on the Trinity motherboard. This heatsink was only used for a brief time.
Short Slug
Used on the Trinity, Corona, Waitsburg, and Stingray motherboards. It was also used on Winchester with slightly shortened pegs on the bottom, as Winchester removed the integrated heat spreader.
Prototypes
The following heatsinks were used on different Xbox 360 console variations.
Xbox 360 S Cooler Master Fan & Heatsink
Used on early Trinity prototypes, this heatsink is thicker than the final heatsink and does not feature a copper slug. This was used in correlation with a different fan shroud as well with F92 markings.