Heatsink: Difference between revisions
No edit summary |
|||
| Line 53: | Line 53: | ||
=== Short Slug === | === Short Slug === | ||
Used on the [[Trinity]], [[Corona]], [[Waitsburg]], and [[Stingray]] motherboards. It was also used on [[Winchester]] with slightly shortened pegs on the bottom, as Winchester removed the [[IHS]]. | Used on the [[Trinity]], [[Corona]], [[Waitsburg]], and [[Stingray]] motherboards. It was also used on [[Winchester]] with slightly shortened pegs on the bottom, as Winchester removed the [[IHS|integrated heat spreader]]. | ||
<gallery widths=200px heights=200px> | <gallery widths=200px heights=200px> | ||
Revision as of 23:05, 4 April 2024
The Xbox 360 has used multiple different type of heatsinks for cooling the processors.
Xbox 360 (Original)
The Original Xbox 360 used 2 heatsinks: one for the CPU, and one for the GPU. There were also 2 different versions of each heatsink.
Heatpipe CPU
Used on the Xenon, Zephyr, and Elpis motherboards. It was also used on very early versions of the Falcon motherboard.
Aluminum CPU
Used on the Falcon, Jasper, and Tonasket motherboards.
Low Profile GPU
Used on early/mid Xenon motherboards, Zephyr_A motherboards, and returned on the Tonasket motherboard.
Extended GPU
Used on late Xenon, Zephyr_B/C, Elpis, Falcon, and Jasper motherboards.
Xbox 360 S and Xbox 360 E
The Xbox 360 S and Xbox 360 E use a single heatsink for the CGPU. There were 2 versions of the heatsink. Both versions have a fan mounted on them.
Heatsink with a fan mounted on top
Bottom of the heatsink
Tall Slug
Used on the Trinity motherboard. This heatsink was only used for a brief time.
Short Slug
Used on the Trinity, Corona, Waitsburg, and Stingray motherboards. It was also used on Winchester with slightly shortened pegs on the bottom, as Winchester removed the integrated heat spreader.
