Drive Cables
Hard Drive
Hard Drive cables are only used on the Xbox 360 S and Xbox 360 E. On the Original Xbox 360, the HDD connects directly to a motherboard connector.
Type 1
Used on consoles with Trinity motherboards, and is a combination of a red SATA cable and yellow HDD power cable. The HDD power cable is connected to the motherboard under the HDDM.
Type 2
Used on consoles with Corona, Waitsburg, Stingray, and Winchester motherboards. While being two separate cables, it has a piece of heat shrink connecting them together.
Prototypes
This cable snapped into the HDDM caddy instead of screwing into it like final consoles. This featured a red SATA cable and a yellow power cable.
DVD Drive SATA
Original Xbox 360
Black cable which is used in all Original Xbox 360 consoles. Earlier versions had a small yellow dot on the side that connects to the motherboard, while later versions had a piece of yellow tape on this side.
Xbox 360 S and E
Red Cable
Used in Xbox 360 S and Xbox 360 E consoles. The 90 degree side connected to the motherboard while the 135 degree side plugged into the DVD drive.
Dark Blue Cable
Infrequently used in certain Xbox 360 S and Xbox 360 E consoles instead of the red version.
Prototypes
Xbox 360 S Light Blue Cable
Used on early Trinity Xbox 360 S prototypes. The straight-through side plugged into the motherboard and the 90-degree inverted side plugged into the DVD drive.
DVD Drive Power
Pins 1 and 2 are missing on all variations of this cable.
Black ODD Power Cable
This power cable was used on all Original Xbox 360 consoles and certain prototype Trinity Xbox 360 S consoles.
Yellow ODD Power Cable
This power cable was used on Xbox 360 S consoles with Trinity motherboards.
Blue/Pink ODD Power Cable
This power cable was used on Xbox 360 S and Xbox 360 E consoles with Corona, Waitsburg, Stingray, and Winchester motherboards.