RF Board

The RF Board is a small PCB that plugs into the front of the motherboard. It is responsible for wireless controller connection and the front panel buttons/LEDs.

Original Xbox 360

The RF board on the Original Xbox 360 contains the power button and Ring-Of-Light LEDs.

RF Module

Codename Argon. First Ring of light module for the Xbox 360. Used on pre-launch and launch retail models of the Xbox 360.

Common Fab:

• X803307-002

• 

  Front (Rev A)

• 

  Back (Rev A)

RF01

Mixed builds. Used on all Original Xbox 360's except for Tonasket (unless prototype). Multiple revisions exist with minor differences.

Common Fab:

• X803307-002
• X803307-003 (most common)

• 

  Front (Rev H)

• 

  Back (Rev H)

• 

  Front (Unknown Rev)

• 

  Back (Unknown Rev)

RF02

Known as xFreedom. Used on Tonasket.

• 

  Front

• 

  Back

Xbox 360 S

The RF board on the Xbox 360 S, codename Boron, has capacitive sensors for the power button and eject button. It also contains the sync button and Ring-Of-Light LEDs.

1409

• 

  Front

• 

  Back

1410

• 

  Front

• 

  Back

Xbox 360 E

The RF board on the Xbox 360 E is split into two PCBs, connected by a ribbon cable. The main PCB connected to the motherboard contains the primary functionality. The smaller secondary PCB - attached to the faceplate - contains power button, eject button, sync button, and Ring-Of-Light LEDs.

1575

• 

  Main PCB Front

• 

  Main PCB Back

• 

  Secondary PCB Front

• 

  Secondary PCB Back