Falcon: Difference between revisions

From XenonLibrary
Jump to navigation Jump to search
 
(7 intermediate revisions by the same user not shown)
Line 8: Line 8:
| gputype      = [[Rhea]]
| gputype      = [[Rhea]]
| cpuprocess  = 65nm
| cpuprocess  = 65nm
| gpuprocess  = 80nm
| gpuprocess  = 90nm
| edramprocess = 80nm
| edramprocess = 90nm
| nandsize    = 16MB (Retail)<br>64MB (Dev)
| nandsize    = 16MB (Retail)<br>64MB (Dev)
| video        = [[A/V]] and HDMI
| video        = [[A/V]] and HDMI
Line 21: Line 21:


=== Notable Differences ===
=== Notable Differences ===
* The 90nm [[Waternoose]] CPU has been replaced with the 65nm [[Loki]] CPU
* The [[Waternoose]] CPU has been replaced with the [[Loki]] CPU
* Around March 2008, fixed GPUs started being used in some units, but was not universally used until roughly June/July 2008.
* Around March 2008, fixed GPUs started being used in some units, but was not universally used until roughly June/July 2008
* When the revised GPUs started rolling out, all board started using [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] RAM in a 4x128MB config
* When the revised GPUs started rolling out, almost all boards started using [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] RAM in a 4x128MB config
* [[Qimonda RAM#HYB18H512322AF-13|Qimonda HYB18H51232'''2A'''F-1'''3''']] RAM has been replaced with [[Qimonda RAM#HYB18H512321BF-14|Qimonda HYB18H51232'''1B'''F-1'''4''']]
* [[Qimonda RAM#HYB18H512322AF-13|Qimonda HYB18H51232'''2A'''F-1'''3''']] RAM has been replaced with [[Qimonda RAM#HYB18H512321BF-14|Qimonda HYB18H51232'''1B'''F-1'''4''']]
* When the revised GPUs rolled out, [[Hynix RAM#HY5RS123235BFP-14|Hynix HY5RS123235BFP-14]] and [[Qimonda RAM#HYB18H512321BF-13|Qimonda HYB18H512321BF-13]] RAM are no longer used
* When the revised GPUs rolled out, [[Hynix RAM#HY5RS123235BFP-14|Hynix HY5RS123235BFP-14]] and [[Qimonda RAM#HYB18H512321BF-13|Qimonda HYB18H512321BF-13]] RAM are no longer used
* The [[Power Rails (Original)#V_CPUCORE|V_CPUCORE]] voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
* The [[Power Rails (Original)#V_CPUCORE|V_CPUCORE]] voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
* The [[Power Rails (Original)#V_CPUVCS|V_CPUVCS]] rail was added for the Loki CPU
* The [[Power Rails (Original)#V_CPUVCS|V_CPUVCS]] rail was added for the Loki CPU, as VCS is no longer on silicon
* The board layout has been modified to support the Loki CPU
* The board layout has been modified to support the Loki CPU
* The J7G3 [[Titan]] connector on the front of the motherboard was left on the final motherboard
* The J7G3 [[Titan]] connector on the front of the motherboard was left on the final motherboard
* Some later boards use solid state capacitors for the CPU and GPU output filters
* Some later boards use solid state capacitors for the CPU and GPU output filters
* The [[Heatsink#Heatpipe CPU|heatpipe]] CPU heatsink was replaced with the [[Heatsink#Aluminum CPU| aluminum]] CPU heatsink, however some early boards did not have this change
* The [[Heatsink#Heatpipe CPU|heatpipe]] CPU heatsink was replaced with the [[Heatsink#Aluminum CPU| aluminum]] CPU heatsink, however some early systems did not have this change


=== Specifications ===
=== Specifications ===
* 65nm IBM [[Loki]] CPU
* 65nm [[Loki]] CPU
* 80nm ATi [[Rhea]] GPU with integrated 80nm NEC [[eDRAM]]
* 90nm [[Rhea]] GPU/eDRAM
* 512MB GDDR3 RAM
* 512MB GDDR3 RAM
** 8x64MB [[Hynix RAM#HY5RS123235BFP-14|Hynix HY5RS123235BFP-14]] (Early Boards)
** 8x64MB [[Hynix RAM#HY5RS123235BFP-14|Hynix HY5RS123235BFP-14]] (Early Boards)
Line 51: Line 51:


== Opus ==
== Opus ==
The '''Opus''' name describes a project of fitting a Falcon board into the casings for a Xenon. This was done with a custom A/V port and the removal of the HDMI port. Opus was used for refurbishing defective consoles until the [[Xenon (Motherboard)#Elpis|Elpis]] boards started being produced.
[[File:X812320-003-Opus.jpg|thumb|300px|upright|right|Falcon that has been converted to an Opus]]
 
The '''Opus''' name describes a project of fitting a Falcon board into the casings for a Xenon. This was done with a custom A/V port and the removal of the HDMI port. Opus was used for refurbishing defective consoles until the [[Elpis (Motherboard)|Elpis]] boards started being produced.


=== Notable Differences ===
=== Notable Differences ===
Line 57: Line 59:
* Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing
* Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing
* All Opus boards use revised versions of the [[Rhea]] GPU with higher Tg underfill
* All Opus boards use revised versions of the [[Rhea]] GPU with higher Tg underfill
* All Opus boards use 4x128MB [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] RAM


{{Console Components}}
{{Console Components}}
[[Category:Motherboards]]
[[Category:Motherboards]]

Latest revision as of 13:32, 29 August 2024

Falcon
X812320-003.jpg
Part NumberX812320
IntroducedLate 2007
Used InXbox 360 (Original)
CPU TypeLoki
GPU TypeRhea
CPU Process65nm
GPU Process90nm
eDRAM Process90nm
Nand Size16MB (Retail)
64MB (Dev)
Video OutputsA/V and HDMI
Wattage175W
12V Amperage14.2A
PredecessorZephyr_C
SuccessorJasper

Falcon is the successor to the Zephyr_C motherboard and is used in the Original Xbox 360 series.

Notable Differences

  • The Waternoose CPU has been replaced with the Loki CPU
  • Around March 2008, fixed GPUs started being used in some units, but was not universally used until roughly June/July 2008
  • When the revised GPUs started rolling out, almost all boards started using Qimonda HYB18H1G321AF-14 RAM in a 4x128MB config
  • Qimonda HYB18H512322AF-13 RAM has been replaced with Qimonda HYB18H512321BF-14
  • When the revised GPUs rolled out, Hynix HY5RS123235BFP-14 and Qimonda HYB18H512321BF-13 RAM are no longer used
  • The V_CPUCORE voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
  • The V_CPUVCS rail was added for the Loki CPU, as VCS is no longer on silicon
  • The board layout has been modified to support the Loki CPU
  • The J7G3 Titan connector on the front of the motherboard was left on the final motherboard
  • Some later boards use solid state capacitors for the CPU and GPU output filters
  • The heatpipe CPU heatsink was replaced with the aluminum CPU heatsink, however some early systems did not have this change

Specifications

Opus

Falcon that has been converted to an Opus

The Opus name describes a project of fitting a Falcon board into the casings for a Xenon. This was done with a custom A/V port and the removal of the HDMI port. Opus was used for refurbishing defective consoles until the Elpis boards started being produced.

Notable Differences

  • Removal of the HDMI port
  • Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing
  • All Opus boards use revised versions of the Rhea GPU with higher Tg underfill
Retrieved from "https://xenonlibrary.com/index.php?title=Falcon&oldid=4001"