Drive Cables: Difference between revisions

From XenonLibrary
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
= HDD =
Various cables were used for the drives in the [[Xbox 360]].
[[HDD]] cables are only used on the [[Xbox 360 S]] and [[Xbox 360 E]]. On the [[Original Xbox 360]], the HDD connects directly to a motherboard connector.


== Type 1 ==
= DVD Drive Power =
Used on Trinity consoles, this cable featured a red SATA cable and a yellow HDD power cable. The HDD power cable is connected to the motherboard under the S's HDDM.<gallery>
Pins 1 and 2 are missing on all variations of this cable.
File:X360S-Type1-HDDMC.jpg
 
=== Black ODD Power Cable ===
This power cable was used on all [[Original Xbox 360]] consoles and certain prototype [[Trinity]] [[Xbox 360 S]] consoles.
<gallery>
File:X360 ODD PWR BLK (1).jpg
File:X360 ODD PWR BLK (2).jpg
</gallery>
</gallery>


== Type 2 ==
=== Yellow ODD Power Cable ===
Used on Corona & newer consoles, this cable changed the power cables from yellow to blue from the Type 1 cable. It also was modified to have a piece of heat shrink connecting the two cables together. The HDD power cable was moved over by the ODD and HDD SATA connectors.<gallery>
This power cable was used on [[Xbox 360 S]] consoles with [[Trinity]] motherboards.
File:X360S HDD T2 (2).jpg
 
File:X360S HDD T2 (1).jpg
=== Blue/Pink ODD Power Cable ===
This power cable was used on [[Xbox 360 S]] and [[Xbox 360 E]] consoles with [[Corona]], [[Waitsburg]], [[Stingray]], and [[Winchester]] motherboards.
<gallery>
File:X360S ODD Power (1).jpg
File:X360S ODD Power (2).jpg
</gallery>
</gallery>


== Prototypes ==
= DVD Drive SATA =
This cable snapped into the HDDM caddy instead of screwing into it like final consoles. This featured a red SATA cable and a yellow power cable.


= ODD SATA =
== Original Xbox 360 ==
== Original Xbox 360 ==
 
Black cable which is used in all [[Original Xbox 360]] consoles. Earlier versions had a small yellow dot on the side that connects to the [[motherboard]], while later versions had a piece of yellow tape on this side.
=== Type 1 ===
<gallery>
Black cable. Commonly used in consoles with [[xenon]] and [[zephyr]] [[motherboards]], this connected the DVD drive to the [[motherboard]] and had a small yellow dot on the side that connects to the [[motherboard]].<gallery>
File:X360P ODD T1 (1).jpg
File:X360P ODD T1 (2).jpg
File:X360P ODD T2 (1).jpg
File:X360P ODD T2 (1).jpg
File:X360P ODD T2 (2).jpg
File:X360P ODD T2 (2).jpg
</gallery>
=== Type 2 ===
Black cable. Commonly used in consoles late in the [[zephyr]] life-cycle and newer. This connected the DVD drive to the [[motherboard]] and had a small piece of yellow tape on the side that connects to the [[motherboard]]. There are no functionality differences between this and a Type 1 cable other than how the end that goes to the console was identified.<gallery>
File:X360P ODD T1 (1).jpg
File:X360P ODD T1 (2).jpg
</gallery>
</gallery>


== Xbox 360 S and E ==
== Xbox 360 S and E ==


=== Red ODD Cable ===
=== Red Cable ===
Commonly used in consoles with [[trinity]] [[Motherboard|motherboards]], this connected the DVD drive to the motherboard. The 90 degree side connected to the [[motherboard]] while the 135 degree side plugged into the DVD drive.<gallery>
Used in [[Xbox 360 S]] and [[Xbox 360 E]] consoles. The 90 degree side connected to the [[motherboard]] while the 135 degree side plugged into the DVD drive.<gallery>
File:X360S ODD Red (1).jpg
File:X360S ODD Red (1).jpg
File:X360S ODD Red (2).jpg
File:X360S ODD Red (2).jpg
</gallery>
</gallery>


=== Dark Blue ODD Cable ===
=== Dark Blue Cable ===
Commonly used in consoles with [[corona]] and newer [[Xbox 360#Xbox 360 S|S]] and [[Xbox 360#Xbox 360 E|E]] systems, this connected the DVD drive to the [[motherboard]].
Infrequently used in certain [[Xbox 360 S]] and [[Xbox 360 E]] consoles instead of the red version.


== Prototypes ==
== Prototypes ==
The following SATA cables were used on different Xbox 360 console variations.


=== Xbox 360 S Light Blue ODD Cable ===
=== Xbox 360 S Light Blue Cable ===
Used on early [[trinity]] prototypes, this SATA cable differed in in terms of the color and in the cable ends. The straight-through side plugged into the motherboard and the 90 degree inverted side plugged into the DVD drive. Interestingly enough, the port on final [[trinity]] [[Motherboard|motherboards]] is referred to as "ODD_Blue" even though the final cable is red.<gallery>
Used on early [[Trinity]] [[Xbox 360 S]] prototypes. The straight-through side plugged into the motherboard and the 90-degree inverted side plugged into the DVD drive. <gallery>
File:X360S Blue ODD (1).jpg
File:X360S Blue ODD (1).jpg
File:X360S Blue ODD (2).jpg
File:X360S Blue ODD (2).jpg
Line 52: Line 52:
</gallery>
</gallery>


= ODD Power =
= Hard Drive =
The following ODD power cables were used in the Xbox 360's lifecycle. Pins 1 and 2 are missing on all variations of this cable.
[[Hard Drive]] cables are only used on the [[Xbox 360 S]] and [[Xbox 360 E]]. On the [[Original Xbox 360]], the HDD connects directly to a motherboard connector.


=== Black ODD Power Cable ===
== Type 1 ==
This power cable was used on every Xbox 360 until the trinity motherboard was finalized. Trinity prototypes used this cable for the ODD Drive. <gallery>
Used on consoles with [[Trinity]] [[motherboards]], and is a combination of a red SATA cable and yellow HDD power cable. The HDD power cable is connected to the motherboard under the HDDM.
File:X360 ODD PWR BLK (1).jpg
<gallery>
File:X360 ODD PWR BLK (2).jpg
File:X360S-Type1-HDDMC.jpg
</gallery>
</gallery>


=== Yellow ODD Power Cable ===
== Type 2 ==
This power cable was used on Xbox 360 consoles with trinity motherboards.
Used on consoles with [[Corona]], [[Waitsburg]], [[Stingray]], and [[Winchester]] [[motherboards]]. While being two separate cables, it has a piece of heat shrink connecting them together.
 
<gallery>
=== Blue/Pink ODD Power Cable ===
File:X360S HDD T2 (2).jpg
This power cable was used on Xbox 360 consoles with corona and newer motherboards.<gallery>
File:X360S HDD T2 (1).jpg
File:X360S ODD Power (1).jpg
File:X360S ODD Power (2).jpg
</gallery>
</gallery>


== Prototypes ==
== Prototypes ==
This cable snapped into the HDDM caddy instead of screwing into it like final consoles. This featured a red SATA cable and a yellow power cable.


{{Console Components}}
{{Console Components}}

Latest revision as of 00:58, 9 August 2024

Various cables were used for the drives in the Xbox 360.

DVD Drive Power

Pins 1 and 2 are missing on all variations of this cable.

Black ODD Power Cable

This power cable was used on all Original Xbox 360 consoles and certain prototype Trinity Xbox 360 S consoles.

Yellow ODD Power Cable

This power cable was used on Xbox 360 S consoles with Trinity motherboards.

Blue/Pink ODD Power Cable

This power cable was used on Xbox 360 S and Xbox 360 E consoles with Corona, Waitsburg, Stingray, and Winchester motherboards.

DVD Drive SATA

Original Xbox 360

Black cable which is used in all Original Xbox 360 consoles. Earlier versions had a small yellow dot on the side that connects to the motherboard, while later versions had a piece of yellow tape on this side.

Xbox 360 S and E

Red Cable

Used in Xbox 360 S and Xbox 360 E consoles. The 90 degree side connected to the motherboard while the 135 degree side plugged into the DVD drive.

Dark Blue Cable

Infrequently used in certain Xbox 360 S and Xbox 360 E consoles instead of the red version.

Prototypes

Xbox 360 S Light Blue Cable

Used on early Trinity Xbox 360 S prototypes. The straight-through side plugged into the motherboard and the 90-degree inverted side plugged into the DVD drive.

Hard Drive

Hard Drive cables are only used on the Xbox 360 S and Xbox 360 E. On the Original Xbox 360, the HDD connects directly to a motherboard connector.

Type 1

Used on consoles with Trinity motherboards, and is a combination of a red SATA cable and yellow HDD power cable. The HDD power cable is connected to the motherboard under the HDDM.

Type 2

Used on consoles with Corona, Waitsburg, Stingray, and Winchester motherboards. While being two separate cables, it has a piece of heat shrink connecting them together.

Prototypes

This cable snapped into the HDDM caddy instead of screwing into it like final consoles. This featured a red SATA cable and a yellow power cable.