Prototype XDK-GB: Difference between revisions

From XenonLibrary
Jump to navigation Jump to search
No edit summary
mNo edit summary
 
(18 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Note|Article under construction}}
{{Note|Article under construction}}The PCB used in XDK-GB and its prototypes is a subvariant of Jasper simply called Advanced. 


==Pre-JADK==
==AEV==
Pre-JADK GB prototypes with either be a [[Bringup Configuration]] or have a [[Sidecar|Sidecar]] attachedThey will be in a white case and have various info and internal tracking stickers.
Advanced [[Engineering Verification]]. Internal Prototypes either in [[Bringup Configuration]] or [[Development Kit Configuration]].   
===1GB Config-11===
{{Navbox
Only known unit that uses the configuration 1GB Config-11 is console number 69. This unit does not have [[Bringup Configuration#Lamprey Programming Cables|Lamprey programming cables]].
|name        = Configurations
|title      = [[ConfigID|Known ConfigIDs]]
|listclass  = hlist
|state      = uncollapsed
 
  |list1    = 1GB Config-11{{dot}}[[Prototype_XDK-GB#ADV-XDK-EV2-JADK-EV2|JEVC3-13]]
}}
===JEVC3-13===
===JEVC3-13===
June 2008. JEVC3-13 configured units have a light gray [[Sidecar#Type 1|Type 1 Sidecar]]. They are in a white case, with [[RF Board|RF02]]. The Sidecar on these units was most likely used in conjunction with [[xbRevive|xbRevive]] to allow flashing to the console through [[Sidecar#DVD Emulation|DVD Emulation]]; as these units were rarely supplied to Developers, if at all.
{|class="wikitable"
! Introduced
| Early 2008
|-
! Motherboard
| [[Jasper#XDK-GB|AEV hardware]]
|-
! Fuse Set
| Devkit
|-
! RAM
| 1GB in 2 512MB pools
|-
! Storage
| 120GB [[Hard Drive]]
|-
! Sidecar
| [[Sidecar#Type 1|Type 1]]
|-
! Color
| Console: White<br>Sidecar: Light gray
|}
==ADV==
Advanced [[Design Verification]] Hardware. Internal prototype units in [[Bringup Configuration]] or [[Development Kit Configuration]].
{{Navbox
|name        = Configurations
|title      = [[ConfigID|Known ConfigIDs]]
|listclass  = hlist
|state      = uncollapsed


==JADK==
  |list1    = ADV-09{{dot}}[[Prototype_XDK-GB#ADV-XDK-EV2-JADK-EV2|JADK EV2]]
===JADK EV2===
}}
December 2008. By this stage of XDK-GB prototyping, the [[Sidecar#Prototype Type 2|Prototype Type 2 Sidecar]] design first appears. In a very deep blue, almost black color. It also is the first time we see an early GbE board added to the sidecar. The console is in a white case and features an inverted blue LED [[Prototype RF Board#xFreedom|xFreedom]].
===ADV-XDK-EV2-JADK-EV2===
{|class="wikitable"
! Introduced
| December 2008
|-
! Motherboard
| [[Jasper#XDK-GB|ADV hardware]]
|-
! Fuse Set
| Devkit
|-
! RAM
| 1GB in 2 512MB pools
|-
! Storage
| 120GB [[Hard Drive]]
|-
! Sidecar
| [[Sidecar#Type 2|EV2 Type 2]]
|-
! Color
| Console: White<br>Sidecar: Deep blue, almost black
|}
Utilizing ADV hardware, the unit itself is in [[Engineering Verification|EV]]2 [[Development Kit Configuration|DK Configuration]], which defines the external cosmetics of the case and [[Sidecar|Sidecar's]] prototyping milestone. The [[Engineering Verification|EV]]2 prototype [[Sidecar#Prototype Type 2|Type 2 Sidecar]] features an early GbE (Gigabit Ethernet) card. The console is equipped with an inverted blue LED [[RF Board|Ring of Light]].
==APV==
Advanced [[Production Verifcation|Production Verification]] Hardware. Internal prototype units in [[Bringup Configuration]] or [[Development Kit Configuration]].
{{Navbox
|name        = Configurations
|title      = [[ConfigID|Known ConfigIDs]]
|listclass  = hlist
|state      = uncollapsed


==ADK==
  |list1    = [[Prototype_XDK-GB#ADK EV3|ADK EV3]]
}}
===ADK EV3===
===ADK EV3===
March - April 2009 prototypes. Units used at GDC 2009 and onward until release of final developer hardware in 2010.  
 
The [[Sidecar#Prototype Type 2|Prototype Type 2 Sidecar]] sees the same design as the [[Development Kit#Xbox 360-GB Development Console| Xbox 360-GB Development Console]] variants 1 and 2; XNA tribal branding. While at GDC 2009 these units lacked internal MTE/Config labels. In addition, there was a barcode sticker over the additional GbE port. This was done to accurately represent the final development kit that would be later sent to developers. None-showcase ADK EV3's had MTE/Config labels and no barcode sticker.
{|class="wikitable"
Early ADK EV3 units had parts dated 2008 but with a 2009 build date on MFR. Later parts would  be made in 2009. These units also featured a blue LED [[Prototype RF Board#xFreedom|xFreedom]]
! Introduced
| April 2009
|-
! Motherboard
| [[Jasper#XDK-GB|APV hardware]]
|-
! Fuse Set
| Devkit
|-
! RAM
| 1GB in 2 512MB pools
|-
! Storage
| 120GB [[Hard Drive]]
|-
! Sidecar
| [[Sidecar#Type 2|EV3 Type 2]]
|-
! Color
| Console: Deep purple<br>Sidecar: Chrome blue
|}
 
Displayed at GDC 2009.  
The [[Engineering Verification|EV]]3 [[Development Kit Configuration|DK]] milestone sees the [[Sidecar#Prototype Type 2|EV Prototype Type 2 Sidecar]] and Case in the same design as the [[Development Kit#Xbox 360-GB Development Console| Xbox 360-GB Development Console]] variants 1 and 2; XNA branding. Although, with 2008 dated parts.  Features a later revision of the GbE card. While at GDC 2009 these units lacked internal MTE/Config labels. In addition, there was a barcode sticker over the additional GbE port. This was done to accurately represent the final development kit that would be later sent to developers. None-showcase ADK EV3's had MTE/Config labels and no barcode sticker. ADK EV3 units had parts dated 2008 but with a 2009 manufacturing date.


====Decommissioned ADK EV3====
====Decommissioned ADK EV3====
*Gutted GbE board and blue LED.
*Removed GbE board, Elite faceplate, and green LED [[RF Board|Ring of Light]].


=== Unknown APV-ADK-EV3 Test Kit ===
{{Consoles}}
{{Consoles}}
[[Category:Internal Hardware]]
[[Category:Internal Hardware]]

Latest revision as of 16:16, 5 April 2024

Note  Article under construction

The PCB used in XDK-GB and its prototypes is a subvariant of Jasper simply called Advanced.

AEV

Advanced Engineering Verification. Internal Prototypes either in Bringup Configuration or Development Kit Configuration.

JEVC3-13

Introduced Early 2008
Motherboard AEV hardware
Fuse Set Devkit
RAM 1GB in 2 512MB pools
Storage 120GB Hard Drive
Sidecar Type 1
Color Console: White
Sidecar: Light gray

ADV

Advanced Design Verification Hardware. Internal prototype units in Bringup Configuration or Development Kit Configuration.

ADV-XDK-EV2-JADK-EV2

Introduced December 2008
Motherboard ADV hardware
Fuse Set Devkit
RAM 1GB in 2 512MB pools
Storage 120GB Hard Drive
Sidecar EV2 Type 2
Color Console: White
Sidecar: Deep blue, almost black

Utilizing ADV hardware, the unit itself is in EV2 DK Configuration, which defines the external cosmetics of the case and Sidecar's prototyping milestone. The EV2 prototype Type 2 Sidecar features an early GbE (Gigabit Ethernet) card. The console is equipped with an inverted blue LED Ring of Light.

APV

Advanced Production Verification Hardware. Internal prototype units in Bringup Configuration or Development Kit Configuration.

ADK EV3

Introduced April 2009
Motherboard APV hardware
Fuse Set Devkit
RAM 1GB in 2 512MB pools
Storage 120GB Hard Drive
Sidecar EV3 Type 2
Color Console: Deep purple
Sidecar: Chrome blue

Displayed at GDC 2009. The EV3 DK milestone sees the EV Prototype Type 2 Sidecar and Case in the same design as the Xbox 360-GB Development Console variants 1 and 2; XNA branding. Although, with 2008 dated parts. Features a later revision of the GbE card. While at GDC 2009 these units lacked internal MTE/Config labels. In addition, there was a barcode sticker over the additional GbE port. This was done to accurately represent the final development kit that would be later sent to developers. None-showcase ADK EV3's had MTE/Config labels and no barcode sticker. ADK EV3 units had parts dated 2008 but with a 2009 manufacturing date.

Decommissioned ADK EV3

Unknown APV-ADK-EV3 Test Kit