Prototype XDK-GB: Difference between revisions

From XenonLibrary
Jump to navigation Jump to search
mNo edit summary
Line 2: Line 2:


==AEV==
==AEV==
'A' Engineering Verification, Prototypes either in [[Bringup Configuration]] or Development Configuration with [[Sidecar|Sidecar]] attached.  They will be in a white case and have various info and internal tracking stickers.
'A' [[Engineering Verification]]. Internal Prototypes either in [[Bringup Configuration]] or Development Configuration with [[Sidecar|Sidecar]] attached.  They will be in a white case and have various info and internal tracking stickers.
===1GB Config-11===
===1GB Config-11===
Only known unit that uses the configuration 1GB Config-11 is console number 69. This unit does not have [[Bringup Configuration#Lamprey Programming Cables|Lamprey programming cables]].
Only known unit that uses the configuration 1GB Config-11 is console number 69. This unit does not have [[Bringup Configuration#Lamprey Programming Cables|Lamprey programming cables]].
Line 9: Line 9:


==ADV==
==ADV==
'A' Design Verification, Internal prototype units in [[Bringup Configuration]] or Development Configurations.
'A' [[Design Verification]] Hardware. Internal prototype units in [[Bringup Configuration]] or Development Kit Configurations.
{{Navbox
|name        = Configurations
|title      = [[ConfigID|Known ConfigIDs]]
|listclass  = hlist
|state      = uncollapsed


===ADV-XDK-EV2-JADK EV2===
  |list1    = ADV-09{{dot}}[[Prototype_XDK-GB#ADV-XDK-EV2-JADK-EV2|JADK EV2]]
Also known as just JADK EV2 units produced around December 2008. Although this unit is in DK (Development Kit) configuration, it's still ADV hardware. By this stage of XDK-GB prototyping, the [[Sidecar#Prototype Type 2|Prototype Type 2 Sidecar]] design first appears. In a very deep blue, almost black color. It also is the first time we see an early GbE board added to the sidecar. The console is in a white case and features an inverted blue LED.
}}
==ADK==
===ADV-XDK-EV2-JADK-EV2===
Also known as just JADK EV2 units, produced around December 2008. Utilizing ADV hardware, the unit itself is in [[Engineering Verification|EV]]2 [[Development Kit Configuration|DK Configuration]], which defines the external cosmetics of the case and [[Sidecar|Sidecar's]] prototyping milestone. The [[Engineering Verification|EV]]2 prototype [[Sidecar#Prototype Type 2|Type 2 Sidecar]] is molded in a very deep blue, almost black color and features an early GbE (Gigabit Ethernet) board. The console is in a white case and is equipped with an inverted blue LED.
==APV==
'A' [[Production Verifcation|Production Verification]] Hardware. Internal prototype units in [[Bringup Configuration]] or Development Kit Configurations.
{{Navbox
|name        = Configurations
|title      = [[ConfigID|Known ConfigIDs]]
|listclass  = hlist
|state      = uncollapsed
 
  |list1    = [[Prototype_XDK-GB#ADK EV3|ADK EV3]]
}}
===ADK EV3===
===ADK EV3===
March - April 2009 prototypes. Units used at GDC 2009 and onward until release of final developer hardware in 2010.  
 
The [[Sidecar#Prototype Type 2|Prototype Type 2 Sidecar]] sees the same design as the [[Development Kit#Xbox 360-GB Development Console| Xbox 360-GB Development Console]] variants 1 and 2; XNA tribal branding. While at GDC 2009 these units lacked internal MTE/Config labels. In addition, there was a barcode sticker over the additional GbE port. This was done to accurately represent the final development kit that would be later sent to developers. None-showcase ADK EV3's had MTE/Config labels and no barcode sticker.
{|class="wikitable"
Early ADK EV3 units had parts dated 2008 but with a 2009 build date on MFR. Later parts would  be made in 2009. These units also featured a blue LED [[Prototype RF Board#xFreedom|xFreedom]]
! Introduced
| April 2009
|-
! Motherboard
| [[Jasper#XDK-GB|APV]]
|-
! RAM
| 1GB in 2 512MB pools
|-
! Storage
| 120GB [[Hard Drive]]
|-
! Sidecar
| [[Sidecar#Type 2|EV3 Type 2]]
|-
! Color
| Console: Deep purple<br>Sidecar: Chrome blue
|}
 
Displayed GDC 2009 and onward until the release of final developer hardware in 2010.  
The [[Sidecar#Prototype Type 2|EV3 Prototype Type 2 Sidecar]] sees the same design as the [[Development Kit#Xbox 360-GB Development Console| Xbox 360-GB Development Console]] variants 1 and 2; XNA branding. Also features a later revision of the GbE card. While at GDC 2009 these units lacked internal MTE/Config labels. In addition, there was a barcode sticker over the additional GbE port. This was done to accurately represent the final development kit that would be later sent to developers. None-showcase ADK EV3's had MTE/Config labels and no barcode sticker. ADK EV3 units had parts dated 2008 but with a 2009 manufacturing date.


====Decommissioned ADK EV3====
====Decommissioned ADK EV3====
*Gutted GbE board and blue LED.
*Removed GbE board, Elite faceplate, and green LED [[RF Board|Ring of Light]].


=== Unknown Test Kit ADK EV3 Configuration ===
{{Consoles}}
{{Consoles}}
[[Category:Internal Hardware]]
[[Category:Internal Hardware]]

Revision as of 18:24, 21 January 2024

Note  Article under construction

The PCB used in XDK-GB and its prototypes is a subvariant of Jasper. Although the name is not known, we do know that it stars with the letter 'A', as defined by units' configuration ID. This is also why XDK-GB units will reference Jasper in their config.

AEV

'A' Engineering Verification. Internal Prototypes either in Bringup Configuration or Development Configuration with Sidecar attached. They will be in a white case and have various info and internal tracking stickers.

1GB Config-11

Only known unit that uses the configuration 1GB Config-11 is console number 69. This unit does not have Lamprey programming cables.

JEVC3-13

June 2008. JEVC3-13 configured units have a light gray Type 1 Sidecar. They are in a white case. The Sidecar on these units was most likely used in conjunction with xbRevive to allow flashing to the console through DVD Emulation; as these units were rarely supplied to Developers, if at all.

ADV

'A' Design Verification Hardware. Internal prototype units in Bringup Configuration or Development Kit Configurations.

ADV-XDK-EV2-JADK-EV2

Also known as just JADK EV2 units, produced around December 2008. Utilizing ADV hardware, the unit itself is in EV2 DK Configuration, which defines the external cosmetics of the case and Sidecar's prototyping milestone. The EV2 prototype Type 2 Sidecar is molded in a very deep blue, almost black color and features an early GbE (Gigabit Ethernet) board. The console is in a white case and is equipped with an inverted blue LED.

APV

'A' Production Verification Hardware. Internal prototype units in Bringup Configuration or Development Kit Configurations.

ADK EV3

Introduced April 2009
Motherboard APV
RAM 1GB in 2 512MB pools
Storage 120GB Hard Drive
Sidecar EV3 Type 2
Color Console: Deep purple
Sidecar: Chrome blue

Displayed GDC 2009 and onward until the release of final developer hardware in 2010. The EV3 Prototype Type 2 Sidecar sees the same design as the Xbox 360-GB Development Console variants 1 and 2; XNA branding. Also features a later revision of the GbE card. While at GDC 2009 these units lacked internal MTE/Config labels. In addition, there was a barcode sticker over the additional GbE port. This was done to accurately represent the final development kit that would be later sent to developers. None-showcase ADK EV3's had MTE/Config labels and no barcode sticker. ADK EV3 units had parts dated 2008 but with a 2009 manufacturing date.

Decommissioned ADK EV3

Unknown Test Kit ADK EV3 Configuration

Retrieved from "https://xenonlibrary.com/index.php?title=Prototype_XDK-GB&oldid=3186"