Prototype XDK-GB
| Note Article under construction |
The PCB used in XDK-GB and its prototypes is a subvariant of Jasper. Although the name is not known, we do know that it stars with the letter 'A', as defined by units' configuration ID. This is also why XDK-GB units will reference Jasper in their config.
AEV
'A' Engineering Verification. Internal Prototypes either in Bringup Configuration or Development Kit Configuration.
JEVC3-13
| Introduced | Early 2008 |
|---|---|
| Motherboard | AEV Hardware |
| Fuse Set | Devkit |
| RAM | 1GB in 2 512MB pools |
| Storage | 120GB Hard Drive |
| Sidecar | Type 1 |
| Color | Console: White Sidecar: Light gray |
ADV
'A' Design Verification Hardware. Internal prototype units in Bringup Configuration or Development Kit Configuration.
ADV-XDK-EV2-JADK-EV2
| Introduced | December 2008 |
|---|---|
| Motherboard | ADV Hardware |
| Fuse Set | Devkit |
| RAM | 1GB in 2 512MB pools |
| Storage | 120GB Hard Drive |
| Sidecar | EV2 Type 2 |
| Color | Console: White Sidecar: Deep blue, almost black |
Utilizing ADV hardware, the unit itself is in EV2 DK Configuration, which defines the external cosmetics of the case and Sidecar's prototyping milestone. The EV2 prototype Type 2 Sidecar features an early GbE (Gigabit Ethernet) card. The console is equipped with an inverted blue LED Ring of Light.
APV
'A' Production Verification Hardware. Internal prototype units in Bringup Configuration or Development Kit Configuration.
ADK EV3
| Introduced | April 2009 |
|---|---|
| Motherboard | APV Hardware |
| Fuse Set | Devkit |
| RAM | 1GB in 2 512MB pools |
| Storage | 120GB Hard Drive |
| Sidecar | EV3 Type 2 |
| Color | Console: Deep purple Sidecar: Chrome blue |
Displayed at GDC 2009. The EV3 Prototype Type 2 Sidecar and Case sees the same design as the Xbox 360-GB Development Console variants 1 and 2; XNA branding. Although, with 2008 dated parts. Features a later revision of the GbE card. While at GDC 2009 these units lacked internal MTE/Config labels. In addition, there was a barcode sticker over the additional GbE port. This was done to accurately represent the final development kit that would be later sent to developers. None-showcase ADK EV3's had MTE/Config labels and no barcode sticker. ADK EV3 units had parts dated 2008 but with a 2009 manufacturing date.
Decommissioned ADK EV3
- Removed GbE board, Elite faceplate, and green LED Ring of Light.