Prototype XDK-GB
| Note Article under construction |
The PCB used in XDK-GB and its prototypes is a subvariant of Jasper. Although the name is not known, we do know that it stars with the letter 'A', as defined by units' configuration ID. This is also why XDK-GB units will reference Jasper in their config.
AEV
'A' Engineering Verification. Internal Prototypes either in Bringup Configuration or Development Kit Configuration.
JEVC3-13
| Introduced | April 2009 |
|---|---|
| Motherboard | APV |
| RAM | 1GB in 2 512MB pools |
| Storage | 120GB Hard Drive |
| Sidecar | EV3 Type 2 |
| Color | Console: Deep purple Sidecar: Chrome blue |
ADV
'A' Design Verification Hardware. Internal prototype units in Bringup Configuration or Development Kit Configuration.
ADV-XDK-EV2-JADK-EV2
| Introduced | December 2008 |
|---|---|
| Motherboard | ADV Hardware |
| RAM | 1GB in 2 512MB pools |
| Storage | 120GB Hard Drive |
| Sidecar | EV2 Type 2 |
| Color | Console: White Sidecar: Deep Blue, almost Black |
Utilizing ADV hardware, the unit itself is in EV2 DK Configuration, which defines the external cosmetics of the case and Sidecar's prototyping milestone. The EV2 prototype Type 2 Sidecar is molded in a very deep blue, almost black color and features an early GbE (Gigabit Ethernet) board. The console is in a white case and is equipped with an inverted blue LED.
APV
'A' Production Verification Hardware. Internal prototype units in Bringup Configuration or Development Kit Configuration.
ADK EV3
| Introduced | April 2009 |
|---|---|
| Motherboard | APV Hardware |
| RAM | 1GB in 2 512MB pools |
| Storage | 120GB Hard Drive |
| Sidecar | EV3 Type 2 |
| Color | Console: Deep purple Sidecar: Chrome blue |
Displayed at GDC 2009. The EV3 Prototype Type 2 Sidecar sees the same design as the Xbox 360-GB Development Console variants 1 and 2; XNA branding. Also features a later revision of the GbE card. While at GDC 2009 these units lacked internal MTE/Config labels. In addition, there was a barcode sticker over the additional GbE port. This was done to accurately represent the final development kit that would be later sent to developers. None-showcase ADK EV3's had MTE/Config labels and no barcode sticker. ADK EV3 units had parts dated 2008 but with a 2009 manufacturing date.
Decommissioned ADK EV3
- Removed GbE board, Elite faceplate, and green LED Ring of Light.