Falcon: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 22: | Line 22: | ||
=== Notable Differences === | === Notable Differences === | ||
* The 90nm [[Waternoose (CPU)#Waternoose2|Waternoose2]] CPU has been replaced with the 65nm [[Loki (CPU)|Loki]] CPU | * The 90nm [[Waternoose (CPU)#Waternoose2|Waternoose2]] CPU has been replaced with the 65nm [[Loki (CPU)|Loki]] CPU | ||
* When the revised GPUs rolled out, around March 2008, all | * When the revised GPUs rolled out, around March 2008, all board started using 4x128MB [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] RAM | ||
* Around March 2008, fixed GPUs started being used | * Around March 2008, fixed GPUs started being used | ||
* The CPU voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain | * The CPU voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain | ||
| Line 49: | Line 49: | ||
* Removal of the HDMI port | * Removal of the HDMI port | ||
* Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing | * Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing | ||
* All Opus' use 4x128MB Qimonda HYB18H1G321AF-14 RAM | * All Opus' use 4x128MB [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] RAM | ||
[[Category:Motherboards]] | [[Category:Motherboards]] | ||
Revision as of 20:50, 20 December 2022
The Falcon is the successor to the Zephyr_C, and is used in the Original Xbox 360 series.
Notable Differences
- The 90nm Waternoose2 CPU has been replaced with the 65nm Loki CPU
- When the revised GPUs rolled out, around March 2008, all board started using 4x128MB Qimonda HYB18H1G321AF-14 RAM
- Around March 2008, fixed GPUs started being used
- The CPU voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
- The board layout has been modified to support the 65nm CPU
- Other small changes were made to the board layout
- The J7G3 Titan connector on the front of the motherboard was left on the final motherboard
- Some later boards used solid state capacitors for the CPU and GPU output filters
- The heatpipe CPU heatsink was replaced with the aluminum CPU heatsink
Specifications
- 65nm IBM Loki CPU
- 80nm ATi Rhea GPU with integrated 80nm eDRAM
- 512MB DDR3 RAM
- 8x64MB Hynix HY5RS123235B (Early Models)
- 8x64MB Qimonda HYB18H512322AF-13 (Early Models)
- 4x128MB Qimonda HYB18H1G321AF-14 (Mid/Late Models)
- XSB Southbridge
- HANA
- 16MB Hynix HY27US08281A Nand
- Boardcom or ICS Ethernet PHY
Opus
The Opus motherboard is exactly the same as the Falcon, with exception to a custom A/V port that is installed, and the removal of the HDMI port. These modifications allow the Opus to fit into the casings for a Xenon. This was used for refurbishing defective consoles until the Elpis boards started being produced. The part number is also the same as Falcon.
Notable Differences
- Removal of the HDMI port
- Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing
- All Opus' use 4x128MB Qimonda HYB18H1G321AF-14 RAM