Waternoose: Difference between revisions

From XenonLibrary
Jump to navigation Jump to search
No edit summary
No edit summary
Line 46: Line 46:


=== DD2.0 ===
=== DD2.0 ===
DD2.0, is the production version of the [[XCPU]] running at 3.2GHz. It also contains a programmed ROM containing the [[1BL]]. Early versions with part number X02046-002 used in certain pre-final consoles were still labelled "XCPU-ES" and ran at 2.8GHz. Some chips were binned for 75W as opposed to 85W.
DD2.0, is the production version of the [[XCPU]] running at 3.2GHz. It also contains a programmed ROM containing the [[1BL]]. Some later versions were binned for 75W as opposed to 85W, while the earlier chips were 85W. Very early versions with part number X02046-002 used in certain pre-final consoles were still labelled "XCPU-ES" and ran at 2.8GHz.


* Part Numbers:  
* Part Numbers:  

Revision as of 22:53, 13 May 2023

Waternoose
X02046-001.jpg
DD1.0
File:X02046-008.jpg
DD2.0
X806416-008.jpg
DD3.0
Part NumberX02046
X806416
IntroducedLate 2005
Designed ByIBM
Microsoft
TypeXCPU
Used InXenon
Zephyr
Clock Speed2.8-3.2GHz
CacheL1: 32KB/32KB
L2: 1MB
Instruction SetPowerPC RISC
Cores3
Threads6
Process90nm
TDP85W (DD1.0/DD2.0)
75W (DD3.0)
PackageFlip-chip BGA899
SuccessorLoki

The Waternoose series are the original production model of the XCPU and are used on Xenon and Zephyr motherboards. They have 75-85W TDPs and are manufactured on a 90nm process.

They are named after the fictional character Henry J. Waternoose III.

Specifications

  • 3 two-way SMD-capable RISC cores clocked at 3.2GHz
  • SIMD: Two VMX128 units
  • 32KB L1 data cache
  • 32KB L1 instruction cache
  • 1MB L2 cache at 1.6 GHz with a 256-bit bus
  • 21.6GB/s FSB
  • 768 bits of IBM eFUSE One-Time-Program memory for fusesets
  • One-Time-Programmable ROM and 64KB SRAM for the 1BL and Config Ring
  • Big-endian architecture
  • 90nm process
  • TDP:
    • 85W (DD1.0/DD2.0)
    • 75W (DD3.0)

Details

DD1.0

DD1.0, is the engineering sample of the XCPU, labelled XCPU-ES. It runs at 2.8GHz as opposed to the final speed of 3.2GHz. The ROM does not contain a 1BL, and thus these CPUs can only boot with a Titan board, which injects the 1BL. It still has the original Xbox logo as it was created before the Xbox 360 name was chosen.

  • Part Number: X02046-001
  • Foundry: Canada Foundry

DD2.0

DD2.0, is the production version of the XCPU running at 3.2GHz. It also contains a programmed ROM containing the 1BL. Some later versions were binned for 75W as opposed to 85W, while the earlier chips were 85W. Very early versions with part number X02046-002 used in certain pre-final consoles were still labelled "XCPU-ES" and ran at 2.8GHz.

  • Part Numbers:
    • X02046 (except -001 suffix)
  • Foundries:
    • Canada Foundry
    • Taiwan Foundry

DD3.0

DD3.0 is a revision of DD2.0 that fixes minor design issues and lowers the TDP to 75W. It also adds little-endian support for Original Xbox Emulation.

  • Part Numbers:
    • X806416
  • Foundries:
    • Canada Foundry
    • Taiwan Foundry