Waternoose
 A Waternoose1 | |
| File:X02046.jpg An X02046 Waternoose2 | |
| File:X806416.jpg An X806416 Waternoose2 | |
| Part Number | X02046 X806416 |
|---|---|
| Introduced | 2005 |
| Type | XCPU |
| Used In | Xenon Zephyr |
| Clock Speed | 2.8-3.2GHz |
| Cache | L1: 32KB/32KB L2: 1MB |
| Instruction Set | PowerPC RISC |
| Cores | 3 |
| Threads | 6 |
| Process | 90nm |
| TDP | 75W |
The Waternoose series are the original production model of the XCPU used in the Xbox 360. They have 75W TDPs and are manufactured on the 90nm process.
Waternoose1
The Waternooose1 is the engineering sample of the XCPU, labelled XCPU-ES. It runs at 2.8GHz as opposed to the final speed of 3.2GHz. The ROM does contain a 1BL, and thus these CPUs can only boot with a Titan board, which injects the 1BL. Waternoose1 still has the original Xbox logo as it was created before the Xbox 360 name was chosen.
- Part Number: X02046-001
- Foundry: Canada Foundry
Waternoose2
The Waternoose2 is the production version of the XCPU running at 3.2GHz. There are 2 versions of the chip with different part numbers. It is not known what the difference between these two chips are. Waternoose2 also contains a programmed ROM containing the 1BL. Versions of Waternoose2 with part number X02046-002 used in certain pre-final consoles were still labelled "XCPU-ES" and still had the original Xbox logo.
- Part Numbers:
- X02046 (except -001)
- X806416
- Foundry:
- Canada Foundry
Specifications