Xenon (Motherboard): Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
| type = Motherboard | | type = Motherboard | ||
| usedin = [[Xbox 360 (Original)]] | | usedin = [[Xbox 360 (Original)]] | ||
| cputype = [[ | | cputype = [[Waternoose (CPU)#Waternoose2|Waternoose2]] | ||
| gputype = [[Y1 (GPU)|Y1]] | | gputype = [[Y1 (GPU)|Y1]] | ||
| cpuprocess = 90nm | | cpuprocess = 90nm | ||
| Line 25: | Line 25: | ||
=== Specifications === | === Specifications === | ||
* 90nm IBM [[ | * 90nm IBM [[Waternoose (CPU)#Waternoose2|Waternoose2]] CPU | ||
* 90nm ATi [[Y1 (GPU)|Y1]] GPU with integrated 90nm [[eDRAM]] | * 90nm ATi [[Y1 (GPU)|Y1]] GPU with integrated 90nm [[eDRAM]] | ||
* 512MB (8x64MB) Infineon or Samsung DDR3 RAM | * 512MB (8x64MB) Infineon or Samsung DDR3 RAM | ||
Revision as of 17:04, 20 December 2022
The Xenon motherboard is the first final motherboard and is used in the Original Xbox 360 series. The motherboard has a unique board layout compared to the later boards, especially noticeable with the capacitors around the CPU heatsink, and use of the ANA chip.
Notes
- At some point in 2006, at least one of the manufacturers of the Xenon started applying glue around the CPU and GPU, likely as an attempt to reduce the failure rate
- Some consoles use small yellow 820uF capacitors, while other consoles use silver 820uF solid capacitors
- Some capacitors used for voltage regulation positioned around the CPU heatsink are defective and prone to failure (see Capacitor Plague for details)
Specifications
- 90nm IBM Waternoose2 CPU
- 90nm ATi Y1 GPU with integrated 90nm eDRAM
- 512MB (8x64MB) Infineon or Samsung DDR3 RAM
- XSB Southbridge
- ANA
- Hynix 16MB Nand
- Boardcom or ICS Ethernet PHY
- Cypress Clock Generator