Prototype XDK-GB

Information regarding configurations has yet to be fully understood, listed is only whats known and is wiling to change as more information is found.

Pre-JADK

Pre-JADK GB prototypes with either be a Bringup unit or have a Sidecar attached. They will be in a white case and have various info and internal tracking stickers.

1GB Config-11

Only known unit that uses the configuration 1GB Config-11 is console number 69. This unit does not have Lamprey programming cables.

JEVC3-13

June 2008. JEVC3-13 configured units have a light gray type 1 Sidecar. They are in a white case, with green ring of light. The Sidecar on these units was most likely used in conjunction with xbRevive to allow flashing to the console through DVD Emulation; as these units were rarely supplied to Developers, if at all.

JADK

JADK EV2

December 2008. By this stage of XDK-GB prototyping, the type 2 Sidecar design first appears. In a very deep blue, almost black color. It also is the first time we see an early GbE board added to the sidecar. The console is in a white case and features an inverted blue LED xFreedom.

ADK

ADK EV3

March - April 2009 prototypes. Units used at GDC 2009 and onward until release of final developer hardware in 2010. Prototype type 2 Sidecar. While at GDC these units laced internal MTE/Config labels as well as the GBE port taped over the additional GbE port to accurately represent the final console to Developers.

Early ADK EV3 units had parts dated 2008 but will a 2009 build date on MFR. Later parts would have be made in 2009.

Decommissioned ADK EV3

• Gutted GbE board and Blue LED xFreedom replaced with green.