Prototype XDK-GB: Difference between revisions
m (→Pre-JADK) |
mNo edit summary |
||
| Line 4: | Line 4: | ||
==Pre-JADK== | ==Pre-JADK== | ||
Pre-JADK GB prototypes with either be a [[Bringup Units|Bringup unit]] or have a [[Sidecar|Sidecar]] attached. They will be in a white case and have various info and internal tracking stickers. | Pre-JADK GB prototypes with either be a [[Bringup Units|Bringup unit]] or have a [[Sidecar|Sidecar]] attached. They will be in a white case and have various info and internal tracking stickers. | ||
===1GB Config-11=== | ===1GB Config-11=== | ||
Only known unit that uses the configuration 1GB Config-11 is console number 69. | Only known unit that uses the configuration 1GB Config-11 is console number 69. This unit does not have [[Lamprey#Lamprey Programming Cables|Lamprey programming cables]]. | ||
===JEVC3-13=== | ===JEVC3-13=== | ||
June 2008. JEVC3-13 configured units have a light gray [[Sidecar#Type 1|Type 1 Sidecar]]. | June 2008. JEVC3-13 configured units have a light gray [[Sidecar#Type 1|Type 1 Sidecar]]. The Sidecar on these units was most likely used in conjunction with [[xbRevive|xbRevive]] to allow flashing to the console through [[Sidecar#DVD Emulation|DVD Emulation]]; as these units were rarely supplied to Developers, if at all. | ||
==JADK== | ==JADK== | ||
| Line 15: | Line 15: | ||
===ADK EV3=== | ===ADK EV3=== | ||
March - April 2009 prototypes. Units used at GDC 2009 and onward until release of final developer hardware in 2010. | March - April 2009 prototypes. Units used at GDC 2009 and onward until release of final developer hardware in 2010. | ||
Prototype Type 2v2 Sidecar. While at GDC these units laced internal MTE/Config | Prototype Type 2v2 Sidecar. While at GDC these units laced internal MTE/Config labels as well as the GBE port taped over the additional GbE port to accurately represent the final console to Developers. | ||
decommissioned ADK EV3's | decommissioned ADK EV3's | ||
Gutted GbE board and Blue LED xFreedom replaced with green. | Gutted GbE board and Blue LED xFreedom replaced with green. | ||
Revision as of 21:56, 31 December 2022
Information regarding configurations has yet to be fully understood, listed is only whats known and is wiling to change as more information is found.
Pre-JADK
Pre-JADK GB prototypes with either be a Bringup unit or have a Sidecar attached. They will be in a white case and have various info and internal tracking stickers.
1GB Config-11
Only known unit that uses the configuration 1GB Config-11 is console number 69. This unit does not have Lamprey programming cables.
JEVC3-13
June 2008. JEVC3-13 configured units have a light gray Type 1 Sidecar. The Sidecar on these units was most likely used in conjunction with xbRevive to allow flashing to the console through DVD Emulation; as these units were rarely supplied to Developers, if at all.
JADK
JADK EV3
ADK
ADK EV3
March - April 2009 prototypes. Units used at GDC 2009 and onward until release of final developer hardware in 2010. Prototype Type 2v2 Sidecar. While at GDC these units laced internal MTE/Config labels as well as the GBE port taped over the additional GbE port to accurately represent the final console to Developers. decommissioned ADK EV3's Gutted GbE board and Blue LED xFreedom replaced with green.