Heatsink

From XenonLibrary
Revision as of 12:16, 19 January 2023 by Octal450 (talk | contribs)
Jump to navigation Jump to search

The Xbox 360 has used multiple different type of heatsinks for cooling the processors.

Xbox 360 (Original)

The Original Xbox 360 used 2 heatsinks: one for the CPU, and one for the GPU. There were also 2 different versions of each heatsink.

Heatpipe CPU

The heatsink used to cool Waternoose on the Original Xbox 360. It was also very briefly used to cool Loki on very early versions of the Falcon motherboard.

Aluminum CPU

The heatsink used to cool Loki on the Original Xbox 360. As Loki has a significantly reduced TDP, this heatsink has less thermal mass than the one it replaces despite being physically larger.

Low Profile GPU

Extended GPU

Xbox 360 S and Xbox 360 E

The Xbox 360 S and Xbox 360 E use a single heatsink for the CGPU. There were 2 versions of the heatsink. Both versions have a fan mounted on them.

Tall Slug

The original heatsink used to cool Valhalla on the Trinity motherboard. This heatsink was only used for a brief time.

Short Slug

This heatsink replaced the Tall Slug CGPU heatsink for cooling Valhalla, and was used on the Trinity, Corona, Waitsburg, and Stingray. It was also used on Winchester with slightly shortened pegs on the bottom, as Winchester removed the IHS.