Heatsink: Difference between revisions
No edit summary |
No edit summary |
||
| (51 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{See also|Fan}} | |||
The [[Xbox 360]] has used multiple different type of heatsinks for cooling the processors. | The [[Xbox 360]] has used multiple different type of heatsinks for cooling the processors. | ||
| Line 5: | Line 6: | ||
=== Heatpipe CPU === | === Heatpipe CPU === | ||
Used on the [[Xenon (Motherboard)|Xenon]], [[Zephyr]], and [[Elpis (Motherboard)|Elpis]] motherboards. It was also used on very early versions of the [[Falcon]] motherboard. | Used on the [[Xenon (Motherboard)|Xenon]], [[Zephyr]], and [[Elpis (Motherboard)|Elpis]] motherboards. It was also used on very early versions of the [[Falcon]] motherboard. Later revisions found on late 2006 and newer boards had less of a cutout near the rounded heat pipe on the side. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Heatpipe-CPU.jpg | File:Heatpipe-CPU.jpg | ||
File:Heatpipe-CPU-Bottom.jpg | File:Heatpipe-CPU-Bottom.jpg | ||
| Line 15: | Line 16: | ||
Used on the [[Falcon]], [[Jasper]], and [[Tonasket]] motherboards. | Used on the [[Falcon]], [[Jasper]], and [[Tonasket]] motherboards. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Aluminum-CPU.jpg | File:Aluminum-CPU.jpg | ||
File:Aluminum-CPU-Bottom.jpg | File:Aluminum-CPU-Bottom.jpg | ||
| Line 21: | Line 22: | ||
=== Low Profile GPU === | === Low Profile GPU === | ||
Used on early/mid [[Xenon (Motherboard)|Xenon]] motherboards and returned on the [[Tonasket]] motherboard. | Used on early/mid [[Xenon (Motherboard)|Xenon]] motherboards, [[Zephyr#Zephyr_A|Zephyr_A]] motherboards, and returned on the [[Tonasket]] motherboard. | ||
<gallery widths=300px heights=200px> | <gallery widths="300px" heights="200px"> | ||
File:Low-Profile-GPU.jpg | File:Low-Profile-GPU.jpg | ||
File:Low-Profile-GPU-Bottom.jpg | File:Low-Profile-GPU-Bottom.jpg | ||
| Line 29: | Line 30: | ||
=== Extended GPU === | === Extended GPU === | ||
Used on late [[Xenon (Motherboard)|Xenon]], [[Zephyr]], [[Elpis (Motherboard)|Elpis]], [[Falcon]], and [[Jasper]] motherboards. | Used on late [[Xenon (Motherboard)|Xenon]], [[Zephyr#Zephyr_B|Zephyr_B/C]], [[Elpis (Motherboard)|Elpis]], [[Falcon]], and [[Jasper]] motherboards. | ||
<gallery widths=350px heights=200px> | <gallery widths="350px" heights="200px"> | ||
File:Extended-GPU.jpg | File:Extended-GPU.jpg | ||
File:Extended-GPU-Bottom.jpg | File:Extended-GPU-Bottom.jpg | ||
| Line 37: | Line 38: | ||
== Xbox 360 S and Xbox 360 E == | == Xbox 360 S and Xbox 360 E == | ||
The [[Xbox 360 S]] and [[Xbox 360 E]] use a single heatsink for the [[CGPU]]. There were 2 versions of the heatsink. Both versions have | The [[Xbox 360 S]] and [[Xbox 360 E]] use a single heatsink for the [[CGPU]]. There were 2 versions of the heatsink. Both versions have an upward-blowing [[fan]] mounted on them. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Xbox-360-S-Cooler.jpg|Heatsink with | File:Xbox-360-S-Cooler.jpg|Heatsink with [[fan]] mounted on top | ||
File:Xbox-360-S-Heatsink-Bottom.jpg|Bottom of the heatsink | File:Xbox-360-S-Heatsink-Bottom.jpg|Bottom of the heatsink | ||
</gallery> | </gallery> | ||
| Line 47: | Line 48: | ||
Used on the [[Trinity]] motherboard. This heatsink was only used for a brief time. | Used on the [[Trinity]] motherboard. This heatsink was only used for a brief time. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Xbox-360-S-Tall-Slug.jpg | File:Xbox-360-S-Tall-Slug.jpg | ||
</gallery> | </gallery> | ||
=== Short Slug === | === Short Slug === | ||
Used on the [[Trinity]], [[Corona]], [[Waitsburg]], and [[Stingray]] motherboards. It was also used on [[Winchester]] with slightly shortened pegs on the bottom, as Winchester removed the [[IHS]]. | Used on the [[Trinity]], [[Corona]], [[Waitsburg]], and [[Stingray]] motherboards. It was also used on [[Winchester]] with slightly shortened pegs on the bottom, as Winchester removed the [[IHS|integrated heat spreader]]. | ||
<gallery widths=200px heights=200px> | <gallery widths="200px" heights="200px"> | ||
File:Xbox-360-S-Short-Slug.jpg | File:Xbox-360-S-Short-Slug.jpg | ||
</gallery> | |||
== Prototypes == | |||
=== Workbench Cooler === | |||
Used internally in a variety of applications. This heatsink featured a copper slug and a downward-blowing Cooler Master fan. The [[TIM|thermal interface material (TIM)]] is sized big enough to fit [[Shiva]], [[XCPU]], or the [[GPU]]. | |||
<gallery widths="200px" heights="200px"> | |||
File:Workbench-Heatsink.jpg | |||
File:Workbench-Heatsink-Top.jpg|Cooler Master branded fan | |||
File:Workbench-Heatsink-Bottom.jpg|Large [[TIM]] visible, used with [[Loki]] here | |||
</gallery> | |||
=== Shiva CPU === | |||
Used with [[Shiva]] on early prototype [[Xenon (Motherboard)|Xenon]] motherboards. Also used on early boards with [[Waternoose]]. When used with Shiva, the standoffs were lengthened to account for the [[IHS]]. To accommodate this, the heatsink is shorter than the [[#Heatpipe CPU|final heatsink]]. | |||
<gallery widths="200px" heights="200px"> | |||
File:Shiva-Heatsink.jpg | |||
File:Shiva-Heatsink-Bottom.jpg|Large [[TIM]] visible, despite usage with Waternoose | |||
File:Shiva-vs-XCPU-Heatsink.jpg|Size comparison | |||
</gallery> | |||
=== Trinity Prototype === | |||
Used on early [[Trinity]] prototypes, this heatsink is taller than the final heatsink and does not have a copper slug. A downward-blowing [[Fan#Prototypes|Cooler Master]] or [[Fan#Prototypes|Delta]] branded [[Fan#Prototypes|fan]] is mounted on top. | |||
<gallery widths="200px" heights="200px"> | |||
File:Trinity-Proto-Cooler.jpg|With Cooler Master [[Fan#Prototypes|fan]] | |||
File:Trinity-Proto-Cooler-2.jpg|With Cooler Master [[Fan#Prototypes|fan]] and trim | |||
File:Trinity-Proto-Cooler-3.jpg|With Delta [[Fan#Prototypes|fan]] | |||
File:Trinity-Proto-Cooler-Top.jpg|Top with Cooler Master [[Fan#Prototypes|fan]] | |||
File:Trinity-Proto-Heatsink-Bottom.jpg|The bottom | |||
File:Trinity-Proto-Heatsink.jpg|The bare top | |||
File:Trinity-Proto-Cooler-Closeup.jpg | |||
</gallery> | </gallery> | ||
{{Console Components}} | {{Console Components}} | ||
[[Category:Console Components]] | [[Category:Console Components]] | ||
Latest revision as of 14:01, 10 April 2024
The Xbox 360 has used multiple different type of heatsinks for cooling the processors.
Xbox 360 (Original)
The Original Xbox 360 used 2 heatsinks: one for the CPU, and one for the GPU. There were also 2 different versions of each heatsink.
Heatpipe CPU
Used on the Xenon, Zephyr, and Elpis motherboards. It was also used on very early versions of the Falcon motherboard. Later revisions found on late 2006 and newer boards had less of a cutout near the rounded heat pipe on the side.
Aluminum CPU
Used on the Falcon, Jasper, and Tonasket motherboards.
Low Profile GPU
Used on early/mid Xenon motherboards, Zephyr_A motherboards, and returned on the Tonasket motherboard.
Extended GPU
Used on late Xenon, Zephyr_B/C, Elpis, Falcon, and Jasper motherboards.
Xbox 360 S and Xbox 360 E
The Xbox 360 S and Xbox 360 E use a single heatsink for the CGPU. There were 2 versions of the heatsink. Both versions have an upward-blowing fan mounted on them.
Heatsink with fan mounted on top
Bottom of the heatsink
Tall Slug
Used on the Trinity motherboard. This heatsink was only used for a brief time.
Short Slug
Used on the Trinity, Corona, Waitsburg, and Stingray motherboards. It was also used on Winchester with slightly shortened pegs on the bottom, as Winchester removed the integrated heat spreader.
Prototypes
Workbench Cooler
Used internally in a variety of applications. This heatsink featured a copper slug and a downward-blowing Cooler Master fan. The thermal interface material (TIM) is sized big enough to fit Shiva, XCPU, or the GPU.
Cooler Master branded fan
Shiva CPU
Used with Shiva on early prototype Xenon motherboards. Also used on early boards with Waternoose. When used with Shiva, the standoffs were lengthened to account for the IHS. To accommodate this, the heatsink is shorter than the final heatsink.
Large TIM visible, despite usage with Waternoose
Size comparison
Trinity Prototype
Used on early Trinity prototypes, this heatsink is taller than the final heatsink and does not have a copper slug. A downward-blowing Cooler Master or Delta branded fan is mounted on top.
