Falcon: Difference between revisions

From XenonLibrary
Jump to navigation Jump to search
No edit summary
No edit summary
Line 11: Line 11:
| edramprocess = 80nm
| edramprocess = 80nm
| nandsize    = 16MB
| nandsize    = 16MB
| video        = [[A/V Multi]]
| video        = [[A/V Multi]] and HDMI
| wattage      = 175W
| wattage      = 175W
| 12vamps      = 14.2A
| 12vamps      = 14.2A

Revision as of 19:04, 20 December 2022

Template:Infobox Component

The Falcon is the successor to the Zephyr_C, and is used in the Original Xbox 360 series.

Notable Differences

  • The 90nm Waternoose2 CPU has been replaced with the 65nm Loki CPU
  • The CPU voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
  • The board layout has been modified to support the 65nm CPU
  • Other small changes were made to the board layout
  • The J7G3 Titan connector on the front of the motherboard was left on the final motherboard
  • When the revised GPUs rolled out, around March 2008, all boards came with 4x128MB Qimonda HYB18H1G321AF-14 RAM

Specifications

Opus

The Opus motherboard is exactly the same as the Falcon, with exception to a custom A/V port that is installed, and the removal of the HDMI port. These modifications allow the Opus to fit into the casings for a Xenon. This was used for refurbishing defective consoles until the Elpis boards started being produced. The part number is also the same as Falcon.

Notable Differences

  • Removal of the HDMI port
  • Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing
  • All Opus' use 4x128MB Qimonda HYB18H1G321AF-14 RAM