Falcon: Difference between revisions

From XenonLibrary
Jump to navigation Jump to search
No edit summary
No edit summary
Line 23: Line 23:
* The 90nm [[Waternoose (CPU)|Waternoose]] CPU has been replaced with the 65nm [[Loki (CPU)|Loki]] CPU
* The 90nm [[Waternoose (CPU)|Waternoose]] CPU has been replaced with the 65nm [[Loki (CPU)|Loki]] CPU
* When the revised GPUs rolled out, around March 2008, all board started using [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] RAM in a 4x128MB config
* When the revised GPUs rolled out, around March 2008, all board started using [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] RAM in a 4x128MB config
* When the revised GPUs rolled out, [[Hynix RAM#HY5RS123235FP-14|Hynix HY5RS123235FP-14]] and [[Qimonda RAM#HYB18H512322AF-13|Qimonda HYB18H512322AF-13]] RAM are no longer used
* When the revised GPUs rolled out, [[Hynix RAM#HY5RS123235BFP-14|Hynix HY5RS123235BFP-14]] and [[Qimonda RAM#HYB18H512322AF-13|Qimonda HYB18H512322AF-13]] RAM are no longer used
* Around March 2008, fixed GPUs started being used
* Around March 2008, fixed GPUs started being used
* The CPU voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
* The CPU voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
Line 36: Line 36:
* 80nm ATi [[Rhea (GPU)|Rhea]] GPU with integrated 80nm NEC [[eDRAM]]
* 80nm ATi [[Rhea (GPU)|Rhea]] GPU with integrated 80nm NEC [[eDRAM]]
* 512MB GDDR3 RAM
* 512MB GDDR3 RAM
** 8x64MB [[Hynix RAM#HY5RS123235FP-14|Hynix HY5RS123235FP-14]] (Early Boards)
** 8x64MB [[Hynix RAM#HY5RS123235BFP-14|Hynix HY5RS123235BFP-14]] (Early Boards)
** 8x64MB [[Qimonda RAM#HYB18H512322AF-13|Qimonda HYB18H512322AF-13]] (Early Boards)
** 8x64MB [[Qimonda RAM#HYB18H512322AF-13|Qimonda HYB18H512322AF-13]] (Early Boards)
** 4x128MB [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] (Mid/Late Boards)
** 4x128MB [[Qimonda RAM#HYB18H1G321AF-14|Qimonda HYB18H1G321AF-14]] (Mid/Late Boards)

Revision as of 22:06, 3 January 2023

Falcon
Part NumberX812320
IntroducedLate 2007
TypeMotherboard
Used InXbox 360 (Original)
CPU TypeLoki
GPU TypeRhea
CPU Process65nm
GPU Process80nm
eDRAM Process80nm
Nand Size16MB (Retail)
64MB (Dev)
Video OutputsA/V and HDMI
Wattage175W
12V Amperage14.2A
PredecessorZephyr_C
SuccessorJasper

The Falcon is the successor to the Zephyr_C and is used in the Original Xbox 360 series.

Notable Differences

  • The 90nm Waternoose CPU has been replaced with the 65nm Loki CPU
  • When the revised GPUs rolled out, around March 2008, all board started using Qimonda HYB18H1G321AF-14 RAM in a 4x128MB config
  • When the revised GPUs rolled out, Hynix HY5RS123235BFP-14 and Qimonda HYB18H512322AF-13 RAM are no longer used
  • Around March 2008, fixed GPUs started being used
  • The CPU voltage regulation is now 2 phases, down from 3 phases, but the pads and silkscreen for the third phase still remain
  • The board layout has been modified to support the 65nm CPU
  • Other small changes were made to the board layout
  • The J7G3 Titan connector on the front of the motherboard was left on the final motherboard
  • Some later boards used solid state capacitors for the CPU and GPU output filters
  • The heatpipe CPU heatsink was replaced with the aluminum CPU heatsink

Specifications

Opus

The Opus motherboard is exactly the same as the Falcon, with exception to a custom A/V port that is installed, and the removal of the HDMI port. These modifications allow the Opus to fit into the casings for a Xenon. This was used for refurbishing defective consoles until the Elpis boards started being produced. The part number is also the same as Falcon.

Notable Differences

  • Removal of the HDMI port
  • Custom A/V port to fit the HDMI board layout while being able to fit into the Xenon casing
  • All Opus boards use 4x128MB Qimonda HYB18H1G321AF-14 RAM